|
Overview
All your old DVD / DVD-RAM/ DVD-RW / CD-ROM / CD-RW / HDD /
become new Serial ATA devices! Attaches this Mini dangle
board to back of all types of ATAPI, ATA/133, ATA/100,
ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard
Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ´.) and make them
become new Serial ATA Devices and meet new Serial ATA
standard. This dangle board can support HDD larger than
137GB.The standard 40 pin ATA port can interface to a
parallel Ultra ATA devices. It accepts SATA commands through
the Serial ATA interface from the host, decodes the commands
and converts them to parallel ATA commands to the device.
Response from the device through the parallel ATA bus are
deciphered, processed and converted to SATA protocol and
sent to the host.
Features
|
＃
Compliant Serial ATA 1.0 specification |
|
＃
ATA / ATAPI interface become to SATA interface |
|
＃
Support ATA/ATAPI-7 specification |
| ＃
48bit address Support large capacity HDD |
| ＃
Support ATA hot plug |
| ＃
Low power consumption |
|
|
|
Specification |
|
＃
Serial ATA
1.0 Specification compliant |
|
＃
ATA/ATAPI
PIO mode 0 to 4 |
|
＃
ATA/ATAPI
Ultra DMA of transfer rate 16.7, 25, 33, 48, 66,
100,133,
and
150MB/s |
|
＃ ATA/ATAPI
LBA48 addressing mode associated with 2-byte sector
count |
|
＃
Support
Serial ATA hot-plug |
|
＃
Ultra low
power consumption |
|
＃
Support
Partial/Slumber power management |
|
＃
Master/Slave support |
|
＃
Dimensions: 58.5mm (L) X 25.5mm (W) X 22.5mm (H) |
|
＃
Serial ATA hot-plug |
|
|
|
System
Requirements |
|
＃
SATA host port |
|
＃
Big 4-P
peripheral power connect |
|
|
Package Contents
| ＃ GS-ST101J SATA Converter Board X
1. |
|
＃
Y power Cable
X 1. |
|
＃
Serial ATA cable X1
(OPTIONAL) |
|
|
|
|
